WY546-SFP PCI Gigabit Fiber Gigabit Ethernet

Details ：

WY546-SFP PCI Gigabit Fiber Gigabit Ethernet

◆Ideal solution for implementing multiple network segments, mission-critical high-powered networking applications and environments within high performance servers.

◆Adapters have an integrated hardware acceleration that performs TCP/UDP/IP checksum offload and TCP segmentation. The host processing offloads accelerators frees CPU for application processing.

Advanced Network Software Features

◆Supports advanced Networks software suite. The software suite includes increased fault tolerance, bidirectional load balancing, port aggregation, Jumbo Frame support, VLAN and server management Software for increased bandwidth, scalability, reliability and network availability.

Common Key Features:
Host Interface standard support:	•
PCI v2.2 32Bit, 33/66Mhz	•
High performance, reliability, and low power use in Intel 82546 chip controller	•
Ultra deep, 64 KB packet buffer per channel lowers CPU utilization, avoids PCI congestion	•
Hardware acceleration that can offload tasks from the host processor. The controllers can offload TCP/UDP/IP checksum calculations and TCP segmentation	•
Server class reliability, availability and performance features:	•
Link Aggregation and Load Balancing:	•
Switch dependent: 802.3ad (LACP), Generic Trunking ( GEC / FEC)	•
Switch and NIC Independent	•
Failover	•
Priority queuing – 802.1p layer 2 priority encoding	•
Virtual LANs –802.1q VLAN tagging	•
Jumbo Frame (16KB)	•
802.x flow control	•
Boot ROM embedded or optional can be used for Boot ROM applications	•
PCI Power Management Interface. (v1.1)	•
PCI Hot Plug. (IBM, Compaq, Dell, and Microsoft)	•
Statistics for SNMP MIB II, Ethernet like MIB, and Ethernet MIB (802.3z, Clause 30)	•
LEDs indicators for link/Activity/Speed status

SFP Gigabit Ethernet Technical Specifications - (SFP) Adapters:
SFP (Small Form Factor Pluggable) supports:	1Gb SERDES interfaces supports 1000Base-X in order to connect with SFP to 1000Base-SX / 1000Base-LX / 1000Base-T SFP transceivers
IEEE Standard / Network topology: with 1000Base-T SFP	Gigabit Ethernet (1000Mb/s only), 1000Base-T
IEEE Standard / Network topology: with 1000Base-SX SFP	Fiber Gigabit Ethernet, 1000Base-SX (850nM)
IEEE Standard / Network topology: with 1000Base-LX SFP	Fiber Gigabit Ethernet, 1000Base-LX (1310nM)
SFP Gigabit Ethernet Technical Specifications - (SFP 1000Base-SX) Adapters:
IEEE Standard / Network topology: with 1000Base-SX SFP	Fiber Gigabit Ethernet, 1000Base-SX (850nM)
Cables and Operating distance:	Multimode fiber: 220m at 62.5 um 550m at 50 um
Optical Output Power:	Minimum: -9 dBm
Optical Receive Sensitivity:	Maximum: -20 dBm
SFP Gigabit Ethernet Technical Specifications - (SFP 1000Base-LX) Adapters:
IEEE Standard / Network topology: with 1000Base-LX SFP	Fiber Gigabit Ethernet, 1000Base-LX (1310nM)
Cables and Operating distance:	Single-Mode: 5000m at 9um Multimode fiber: 550m at 50 um 550m at 62.5 um
Optical Output Power:	Typical: -6.6 dBm Minimum: -3 dBm
Optical Receive Sensitivity:	Typical: -26.8 dBm Maximum: -20 dBm
Operating Systems Support
Operating system support:	Windows Linux VMware
General Technical Specifications
Number Of Interfaces:	2 port
PCI Express Card Type:	PCI
PCI Express Voltage:	+3.3V +-9%, +12V +- 8%
PCI Connector:	Gold Finger: PCI 32Bit
Controller: :	Intel 82546EB
I/O:	2 x SFP located on edge of the board