WY5715F PCIe X1 Gigabit Fiber Desktop Adapter

Details ：

WY5715F PCIe X1 Gigabit Fiber Desktop Adapter

◆Enables fault-tolerant via teaming. Traffic from the failed port is routed through up to seven other members of the team.

◆Include software that offers the industry’s best performance and features. VLAN (802.1q) allow traffic segregation and data privacy. Support of 802.1p traffic prioritization gives administrations ability to offer Quality of Service (QOS) on the network.

◆Adapters have an integrated hardware acceleration that performs TCP/UDP/IP checksum offload and TCP segmentation. The host processing offloads accelerators frees CPU for application processing.

◆The ideal solution for implementing multiple network segments, mission-critical high-powered networking applications and environments within high performance servers.

Fiber Gigabit Ethernet (1000Base-SX) Adapters:
Independently Fiber Gigabit Ethernet channel/s support Gigabit Ethernet 1000Base-SX	•
Small Form Factor (SFF) LC Connectors	•

Common Key features:
Host Interface standard support PCI Express 1.0a.	•
High performance, reliability, and low power use in Broadcom 5714 / 5715 / 5704 dual integrated MAC + PHY / SERDES chip controller	•
Ultra deep packet buffer per channel lowers CPU utilization	•
Dual high speed RISC processor per channel for advanced packet classification	•
Hardware acceleration that can offload tasks from the host processor. The controllers can offload TCP/UDP/IP checksum calculations and TCP segmentation	•
Server class reliability, availability and performance features:	•
• Link Aggregation and Load Balancing:
• Switch dependent: 802.3ad (LACP), Generic Trunking ( GEC / FEC)
• Switch and NIC Independent
• Failover
Priority queuing – 802.1p layer 2 priority encoding	•
Virtual LANs –802.1q VLAN tagging	•
Jumbo Frame (9KB).	•
802.x flow control.	•
Boot ROM embedded or optional can be used for Boot ROM applications.	•
PCI Power Management Interface (v1.1)	•
Statistics for SNMP MIB II, Ethernet like MIB, and Ethernet MIB (802.3z, Clause 30)	•
LEDs indicators for link/Activity/Speed status

Fiber Gigabit Ethernet Technical Specifications - (1000Base-SX) Adapters:
IEEE Standard / Network topology:	Fiber Gigabit Ethernet, 1000Base-SX (850nM)
Data Transfer Rate:	2000Mbit/s in full duplex mode per port
Cables and Operating distance:	Multimode fiber: 220m at 62.5 um 550m at 50 um
Optical Output Power:	Typical: -6 dBm Minimum: -9.5 dBm
Optical Receive Sensitivity:	Typical: -21 dBm Maximum: -17 dBm
Operating Systems Support
Operating system support:	Windows.NET Windows 2000 Windows NT Windows98 / WindowsXP Netware Linux FreeBSD Unix: SCO Open Server UnixWare / OpenUnix 8 Solaris
General Technical Specifications
Interface Standard:	PCI Express Base Specification Revision 1.0
Number Of Interfaces:	1 port
PCI Express Card Type:	X1 Lane
PCI Express Voltage:	+3.3V ± 9%
PCI Connector:	X1 Lane
Controller: :	Broadcom BCM5715S