Details ：WY545LX PCI Gigabit Fiber Desktop Adapter
◆Ideal solution for implementing multiple network segments, mission-critical high-powered networking applications and environments within high performance servers.
◆Adapters have an integrated hardware acceleration that performs TCP/UDP/IP checksum offload and TCP segmentation. The host processing offloads accelerators frees CPU for application processing.
Advanced Network Software Features
◆Supports advanced Networks software suite. The software suite includes increased fault tolerance, bidirectional load balancing, port aggregation, Jumbo Frame support, VLAN and server management Software for increased bandwidth, scalability, reliability and network availability.
Common Key Features:
|
Host Interface standard support:
|
•
|
PCI v2.2 32Bit, 33/66Mhz
|
•
|
PCI-X v1.0 32/64-bit, 66/100/133MHz
|
•
|
High performance, reliability, and low power use in Intel 82545 chip controller
|
•
|
Ultra deep, 64 KB packet buffer per channel lowers CPU utilization, avoids PCI congestion
|
•
|
Hardware acceleration that can offload tasks from the host processor. The controllers can offload TCP/UDP/IP checksum calculations and TCP segmentation
|
•
|
Server class reliability, availability and performance features:
|
•
|
Link Aggregation and Load Balancing:
|
•
|
Switch dependent: 802.3ad (LACP), Generic Trunking ( GEC / FEC)
|
•
|
Switch and NIC Independent
|
•
|
Failover
|
•
|
Priority queuing – 802.1p layer 2 priority encoding
|
•
|
Virtual LANs –802.1q VLAN tagging
|
•
|
Jumbo Frame (16KB)
|
•
|
802.x flow control
|
•
|
Boot ROM embedded or optional can be used for Boot ROM applications
|
•
|
PCI Power Management Interface. (v1.1)
|
•
|
PCI Hot Plug. (IBM, Compaq, Dell, and Microsoft)
|
•
|
Statistics for SNMP MIB II, Ethernet like MIB, and Ethernet MIB (802.3z, Clause 30)
|
•
|
LEDs indicators for link/Activity/Speed status
|
|
Fiber Gigabit Ethernet Technical Specifications -(1000Base-LX) Adapters:
|
IEEE Standard / Network topology:
|
Fiber Gigabit Ethernet, 1000Base-LX (1310nM)
|
Data Transfer Rate:
|
2000Mbit/s in full duplex mode per port
|
Cables and Operating distance:
|
Single-Mode: 10000m at 9um
Multimode fiber: 550m at 50 um
550m at 62.5 um
|
Optical Output Power:
|
Typical: -6 dBm
Minimum: -10 dB dBm
|
Optical Receive Sensitivity:
|
Typical: -25 dBm
Maximum: -20 dBm
|
Operating Systems Support
|
Operating system support:
|
Windows
Netware
Linux
FreeBSD
Unix
Solaris
VMware
|
General Technical Specifications
|
Interface Standard:
|
PCI v2.2 32Bit
|
Number Of Interfaces:
|
1 port
|
PCI Card Type:
|
Universal 32 bit Card
|
PCI Voltage:
|
+5V (Min 4.75V, Max, 5.25V)
|
PCI Connector:
|
Universal 32 bit
|
Controller: :
|
Intel: 82545 GM
|
WINYAO
